|
Gorilla Glue
Incredibly Strong Wood Glue
|
|
|
You can use GORILLA GLUE on hardwoods, softwoods, oily woods, stone, metal, ceramic and plastic. Use it to build or repair kitchen and bathroom cabinets, wood trim, tool handles, bird houses, broken spindles and rungs, and is especially popular for tightening loose joints in chairs, tables, and other furniture repair.
A versatile all purpose, interior/exterior adhesive, Gorilla Glue is the strongest available. Yellow glues are only water resistant, whereas this polyurethane glue is 100% waterproof. Many users have told us that it works great on marine applications such as boats and docks, for both construction and repair. It is unaffected by extreme hot and cold temperatures.
|
|
|
- Gorilla Glue is 100% Waterproof and Solvent Free
- Non Brittle
- No Mixing
- No Glue Line
- Easy Clean Up
When applying Gorilla Glue, you have an open working time of twenty minutes or more. It goes on dark but dries to a light tan neutral color, and it covers more than 3 times the surface area of other glues while taking less time to spread. No need to mix, it is 90% cured in 4 hours, and fully cured in 24 hours.
|
Gorilla Glue 8 oz. bottle | $14.95 |
|
Letters from Enthusiastic Gorilla Glue Fans...
I just want to tell you that your glue is the best I've ever worked with, I do a lot of repair on old furniture and I build lots of craft projects and your glue is the finest I've ever used. Thank you
- V.G., Centralia, WA
I use Gorilla Glue often for projects in my job as a building superintendent. I've used it to repair broken table legs, laminating wood for stronger shelves, ceramic tile repair, gluing metal strips, and many more uses. I find the glue stronger and more durable than any other glue I have used. Thank you for a great glue!
- T.K., Ont., Canada
One hundred percent waterproof, great strength... response from users has been overwhelming
- Woodenboat Magazine
|
Read about Gorilla Glue in loose joints.
Directions:
Read and follow directions and safety precautions printed on container.
- Surfaces must be clean, dust free, and tight fitting.
- Dampen non-glue surface with water if air or material are very dry.
- Apply glue to one of the surfaces to be joined. Glue foams to self-spread and penetrate material surfaces. Avoid skin contact as glue temporarily stains.
- For best results, clamping is necessary. Surfaces should remain under pressure for 1 to 4 hours depending on temperature, humidity and moisture content.
- Clean Up: Remove uncured "squeeze out" glue with denatured alcohol, thinner or other solvents. Hardened squeeze out glue is easily removed with chisel, scraper or sandpaper and will not damage tools. Clean wet glue from hands with mineral spirits.
- After use, squeeze air out of bottle and replace cap tightly.
- If you encounter problems, please contact Gorilla Glue Customer Service at 1-800-966-3458.
 
|
